Tesla EV CCS type 2 charger simulation

EV type 2 charger simulation 12v const CP line check whether ev is connected or not. if ev connected (charger switch 1 ) to connect 12v line drop to 9v. On successful connection with EV shows CP line to constant 9v. simulation steps below 👇 1 click the switch 12v red line. after +-12v pwm toggles at 53.5% duty cycle for 32A max charging capacity of Ev. click switch 2 (blue line) 2 (switch 2 of EV) connect to 1.3k 9v drops to 6v constant blue led, 6v denotes vehicle started charging. #error 3 for error click on yellow line switch. if cable not connected properly then CP shows 3v PP line led off and error (RED led )turns on. # *CP line( blue led) toggling indicate ev detected charger connected . *PE (green led) shows ev connection to charging station earthing point. *PP proximity pilot line (yellow led) shows ev connection with charging station .

published 4 hours ago