modified 9 years ago

Source courant

00:48:35

Nead som help pleaz

published 9 years ago

dasdf133

9 years ago

rich11292000

9 years ago

Put a switch on opamp output.

2ctiby

9 years ago

Snip the wire between the diode and the opamp/resistor.....and place a resistor there attached to the diode between. (Any value above 400 ohm will do to get you started)....or you could put the resistor on the other side of the diode, depending on what you are trying to do.

2ctiby

9 years ago

Try to keep the schematic easier to view? : http://everycircuit.com/circuit/6234170203832320

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.