Circuit switch from one to another Voltagemeter with a Schmitt Trigger
- switching from high to low at 3,98 mA.
- switching from low to high at 11,8 mA.
the Schmitt trigger is always inverted, wicht mean you have to invert it again (here not nice a nice solution, but due to space the only possible way)
Sometimes the simulation crashes, but it works anyway if you start it again.
- low range active if the led is on
instead of a DC powersupply, here is a current powersupply. In case of a switching current comsumption of a DUT, the voltage would NOT breackdown. In this caes the DUT is a dynamic electrical consumer, which mean it will change current but not voltage consumption. therefore this circuit would acutally work.
