STEP UP TRANSFORMER

200

06:44:01

I just went into an experiment of how powering a 1kv lamp with 232v and it worked, the way i did is just put 1kOhm resistor parallel with the lamp and it worked, many thanks to Phenomrascalov for helping 

published 8 years ago

hurz

8 years ago

Sorry, but I feel you are failed much sooner in our carrier in understand less complex components. One step back is just a coil, check this http://everycircuit.com/circuit/5031300908187648

soeryo15

8 years ago

Thanks for the suggestion

phenomrascalov

8 years ago

You can use a 1k resistor which is parallel with 1kv lamp.

soeryo15

8 years ago

Thanks dude, it worked!

hurz

8 years ago

Dont see it working. At least the bulb burns longer. Do not underestimate the amount of energy you can store in a coil, but this takes a while and not just a millisecond keypress. Check this and open the switch http://everycircuit.com/circuit/4847510466330624

soeryo15

8 years ago

Im sorry im running on ios, cant find the circuit

hurz

8 years ago

Im sorry for you! Run your circuit from start with closed switch and open it as first action, see what happens.

soeryo15

8 years ago

Alright ill try

hurz

8 years ago

I dont see that. What is your problem?

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.