Motor Lock Teacher

🧲🔐 Magnetic Locked Motor Teacher 🤔 This circuit shows how to magnetically lock an electric motor for vibrational effect. Depending on the motor type they can generate energy doing this. This energy can be directed to capacitors for storage/discharge or other loads for use or containment......such as lights or power banks. As long as the power draw and cooling methods match the heat and potential energy generation the system will run just fine. Granted this is a simulation using "idealized" components in ideal conditions and environments. But these systems do work on small scales and are the basis behind some large systems like some Particle Colliders energy generation. -Magnetic Locking is represented by the +- MRPM polarity swing for the motor and lack of rotation animation. - Clear Frequency (900 Hz): Easy to replicate with a signal generator or basic AC source. - Standard Components: Capacitors, resistors, a small transformer and a lamp for visual cycle feedback. - Labeled Load & Source: The 100 Ω resistor and AC source give a clear entry point for testing. - Waveform Graphs: Show real-time behavior, voltage, current, RMS, and frequency are all mapped. -Swap out the AC source with a Pulsed Square Wave source and it will allow for the use of polarized capacitors with proper timing. ⚖️🧲🔐What It Teaches - How to lock a motor magnetically using AC field modulation. - How to observe phase behavior and resonance using waveform analysis. - How to build a containment loop with passive components and a rotating field. This is a teaching circuit. A circuit that not only functions but tries to show understanding. It’s a reverse-engineering beacon, inviting others to remix and incorporate the idea into their own designs. Gyroscopes, EMF Backflow systems, Magnetic Generators.....the possibilities go far and wide. 🌐 Comments and opinions welcome. 👽

published 7 months ago