"...and there was light."
If you haven't already, update EC to view circuit.
I'm pausing my DVM Series to play around with the new RGB LED component. My previous version can be found here: https://everycircuit.com/circuit/6420598886236160
The sequence is RED -> YELLOW -> GREEN -> CYAN -> WHITE -> CYAN -> BLUE -> PURPLE (repeat).
The general idea is each RGB LED is controlled by a group of 3 MOSFET switches and 3 logic clocks. By switching the MOSFETs on or off with the logic clocks, the color of the LED will change. The capacitors are used to smooth the transition between colors. Each RGB LED group is delayed slightly from the one before, giving the rolling color effect.
Here's the layout:
The one logic button in the right center of the board is the power. Toggle it to turn the strip ON or OFF.
Top row of capacitors - Controls Red, left to right
Middle row of capacitors - Controls Green
Bottom row of capacitors - Controls Blue
Top row of MOSFETS - Controls Red, left to right
Middle row of MOSFETS - Controls Green
Bottom row of MOSFETS - Controls Blue
Top groups of logic clocks - Controls Red
Middle groups of logic clocks - Controls Green
Bottom groups of logic clocks - Controls Blue
