Because aliens...

103

01:00:19

Pls fix and/or explain

published 11 years ago

sandeep1994

11 years ago

Both are directly connected to ground....and try to connect two zener in back to back.....here in ur ckt diode conduct in forward bias and zener in reverse so....the net current is zero and try to conect at least a vg source of 1mv ac/dc.

spammailbox

11 years ago

The ~3V comes from an assumption made by the simulation that a circuit starts energized, so any capacitive load will normally be charged. The diodes have juction capacitance, so at low voltages they act like capacitors. The ~3V is the charge across those capa. Add a large (i.e. 100k) resistor to simulate leakage and it'll work out

shadyxv

11 years ago

Induce noise in the circuit and you get an exponentially increasing voltage at the cathode of diode ...that is if you haven't observed already

spammailbox

11 years ago

No, if you shake it you only disturb the charge, after a short while you simply get the initial conditiona

jose1979

11 years ago

to leave no air connections. That is basic

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.