led scroll

150

01:07:03

led scroll to front to back

published 8 years ago

roops1967

8 years ago

Not bad. Can you improve it so the end lamps where it changes direction takes a full clock cycle like the rest?

creats

8 years ago

Thank you, I'll try, I do not know if I can

BillyT

8 years ago

Nice example, looks good to me. (Looks better at a higher speed).

roops1967

8 years ago

Hi creats change the 2 AND gates that goes to up/down counter to NAND :) Also I'm sure you only need 1 SR latch

roops1967

8 years ago

Oh okay you may wanna ignore what i wrote above. Your gate delay is set quite high in relation to your clock, the end lamps do end up taking a cycle due to this delay

roops1967

8 years ago

If you were to tweak your clock to be 334ms and gate delay to 5.05ms and the simulation speed to 1s/s, then you will notice the end lamps not taking a full cycle. These timing settings may seem odd to you but trust me they are the optimum settings for 1s/s sim speed ;)

roops1967

8 years ago

For example... http://everycircuit.com/circuit/6729421354696704

roops1967

8 years ago

Ignore the ediotic post on my circuit, some turd whose been trolling everyone

creats

8 years ago

Thank you all for helping me improve my circuits

roops1967

8 years ago

My pleasure. i can see you know what you are doing, so helping you get to know this simulator better

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.