Powerfull insect killer after changes

133

01:30:15

The 100MOhm resistor at right Is not connected, there Is output High Voltage.
1k resistor with switch simulates fly or other insects. It will show you the current flowing through its body.

published 6 years ago

hurz

6 years ago

I dont get that wiring for the UV lamp, anyway i removed that cuz it looks unfinished. The grid voltage organized now symetric with lower capacitors get now 1910V rounded, only if the trap is cleaned indicated with a 100MegaOhm resistor, tune it down ton10MOhm and you will see how the voltage drops. So you need to keep the trap clean of dead flys. http://everycircuit.com/circuit/6234867067781120

Riddick242

6 years ago

OK hurz. Your changes looks effective. Thank you. But where you get 325VAC?

hurz

6 years ago

325Vpeak is 230VAC or 230VDC because 230VAC * √2 = 325Vpeak, note if we talk about 230VAC we always talk about the RMS voltage. For peak voltages we have not note it e.g. 325VACpeak. If you say 325VAC its automatically rms !!!

Riddick242

6 years ago

Ok. Thanks

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.