RL CIRCUIT

269

06:21:59

Simple RL Circuit

published 4 years ago

nolan91

4 years ago

Can anyone tell me why I can’t read current, newbie here

Slvstr

4 years ago

I also had the question, but it seems the app treats nodes (spots where wires connect) to read Voltage, and it will read Amps on loads. So if you put in a lamp, or DC Motor, you should see the Amps.

Slvstr

4 years ago

As you can see by your circuit, the WaveForm at the top of screen shows what would be shown if holding the negative always on the ground (symbolized) and what the meter would read if the positive lead of the tester were placed anywhere along the color locations depicted. Hence, why Orange is showing 0V, because there is no voltage difference between anywhere along the orange section of wire and the Ground symbol.

Robert_Kidd

4 years ago

To read current select, for example, the resistor then touch the eye icon at the bottom of screen - current axis appears on rhs.

Robert_Kidd

4 years ago

If you want you can touch scope screen at top and drag your finger down - this separates traces and gives them all their own axes. Hope this helps.

Robert_Kidd

4 years ago

Do reverse of this to go back.

nolan91

4 years ago

Thank you

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.