modified 4 years ago

full adder

00:53:41

its a adder what do i need to explain more?

published 4 years ago

mm9602

4 years ago

There are a couple of ways to signal the inputs. Easiest to use is the Logic source. Use one each for the A and B inputs.

cutecats

4 years ago

can you do that for me and send me a link am not a pro at these stuff😅

mm9602

4 years ago

http://everycircuit.com/circuit/5741913543802880

mm9602

4 years ago

Added the logic sources to inputs A and B, also needed a logic source to XOR #2 to bring it to a logic “low” state. Also added LEDs to indicate the output, right LED represents binary 1 and left LED is the carry bit (or also the binary 2.) if you switch on the extra logic source on XOR 2 it becomes a carry input and both LEDs light up which is binary 3.

Beaker651

4 years ago

I posted it

cutecats

4 years ago

cutecats

4 years ago

sorry i didn't reply these days bec i went on 7 plane's for stuff and id didn't have time to do anything

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.