AC signal creater

213

01:41:42

I wanted to build a flip flop converting AC to DC to use wireless electric transmission . However , it says it cant find solution.

 I did the same with 555 same thing happened.Am ı doing somehting wrong?

published 8 years ago

methamafoz

8 years ago

this was what ı tried to make

BillyT

8 years ago

Circuitry is easier to understand if it is laid out tidy. Also normal convention is to have the positive rail at the top of the circuit. All that aside, here is your circuit, tidied up a bit, and pulsing away. http://everycircuit.com/circuit/5049209051152384

methamafoz

8 years ago

Thanks for the clarification. Nice job done.

rich11292000

8 years ago

Don't forget 99.99% of mosfets have a body diode. This body diode will bypass the mosfet unless you reverse the polarity on source and drain.

rich11292000

8 years ago

I would move the p channel mosfets to the positive and n channels to the negative.@billy?

BillyT

8 years ago

@rich that works well, thanks.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.