modified 10 years ago

Solved - Help. MOSFET does not activate.

01:35:17

What am I doing wrong? :/
There are 10V at the gate, but the resistance between Drain and Source is still more than 1k (10V/9.8mA).

What do I need to change to have a Logic Level MOSFET? I'd like to have about 0.05 Ohm or less  at 5V.

published 10 years ago

rich11292000

10 years ago

There is only 5 volts at the gate, its to hard for 5 volts to open the gate up if 10 volts are pushing back.

rich11292000

10 years ago

You also need a load upsteam of the mosfet.

JasCraft

10 years ago

@rich11292000 still not working...

rich11292000

10 years ago

Use only one voltage, 5 or 10. You have to modify the mosfets properties, increase the first one from 1 to 10, decrease the second from 200 to 10. Now you have a exotic mosfet.

JasCraft

10 years ago

ah thx the settings work!!! :D

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.