@Muse - To prevent your pickup selection and guitar volume knob from changing the tremolo depth, you must **isolate the pickup impedance from the attenuator network**.
---
### How the Fix Works
1. **Active Input Buffer (#BUF)**:
* Connected as a unity-gain voltage follower (buffer).
* It presents an extremely high input impedance to the guitar at node #in (tens of megohms). Because practically zero current is drawn from the guitar, changes in #PKUP or the guitar volume pot have virtually zero effect on the signal level entering the pedal.
* Its output has a very low impedance ($< 1\,\Omega$), driving whatever comes next cleanly and without loading.
2. **Fixed Internal Resistor (#Rin)**:
* A dedicated $10\text{ k}\Omega$ series resistor is placed inside the pedal between the buffer output and the shunt modulation node.
* This resistor now takes over as the fixed top half of the voltage divider against the shunt transistor and potentiometer #DPTH:
$$\text{Attenuation Ratio} = \frac{R_\text{DPTH} + R_{CE}}{R_\text{in} + R_\text{DPTH} + R_{CE}}$$
* Because $R_\text{in}$ is a fixed internal component, your tremolo depth remains constant regardless of whether you switch between single coils, humbuckers, or adjust your guitar volume knob.