modified 11 years ago

Im new in electronic ... I need guide

01:15:33

It this ok

published 11 years ago

pepnerg

11 years ago

What do you need specifically?

josko_v11

11 years ago

It is working if that is what you want to build.

lenzrulz

11 years ago

Keep up the good work

kobe_teey

11 years ago

I want to learn all about electronic component and how to use it .. Hehe

kobe_teey

11 years ago

Thank you guys .. I hope you guide me in this

njolico

11 years ago

If you want the led to stay on longer, put the resistor between the cathode of the led and ground.

kobe_teey

11 years ago

Ok tq njolico

kobe_teey

11 years ago

This is ok?

thebugger

11 years ago

Good job. What you made is actually a delay circuit. The resistor limits the current at 60mA and the capacitor is very high value and will take 20s to charge. So you effectively delay the output by 20s. One more thing the 28.6ohm resistor is too low. Increase it to 330ohm.

thebugger

11 years ago

200s excuse me. The delay is around 3 minutes and a half.

cb86

11 years ago

Its all good until the led explodes :p

thebugger

11 years ago

The led will explode in a minute or so of charging.

kobe_teey

11 years ago

Tq all

ferlop

11 years ago

You know? this is great, the community is actually helping some one who is new at this, and seems like that kobe_teey is very interested and persistent. I thinks that this EC was created with that in mind.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.