Monostable Multivibrator using Op-Amp

195

03:35:25

published 6 years ago

lenzrulz

6 years ago

Innovative...👍

eekee

6 years ago

Pretty good! It triggers on both rising and falling edges, which is a curious feature, but I remember wanting it for something... probably a clock doubler. To see it, replace the AC source with a pushbutton and resistor, or with a logic source.

eekee

6 years ago

Er, if you use a logic source, you'll need to add a gate (unconnected) so you can turn the logic 1 level up to 10V. (It doesn't go higher.) Also try a logic train set to 10ms period, (and with the same high logic 1 level), but that shows it sometimes misses the falling edge.

zorgo

6 years ago

Thanks for the note. Ive actually checked it out. Especially with the modification using the logic source.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.