24/01/10 - Release Circuit, but it does not work in real environment
24/01/22 - Fixed Circuit (Tested in real environment)
24/08/09 - Improved Efficiency and Output Power
------------------------------------
LO Signal : 0.5 ~ 2MHz (Amplitude : 2V)
Use this circuit (LO Circuit) :
https://everycircuit.com/circuit/6012868071522304
If you change LO Frequency, need adjusting output LC value
------------------------------------
Baseband Signal : Recommend 50Hz ~ 100KHz (Amplitude : 1V)
You can use audio signal (Amplitude : 1 ~ 600mV)
------------------------------------
Tested Component, Condition :
Input Power : DC 9V @ 250mA
Output Power ≈ 0.5W (27dBm)
LO Frequency OPAMP : LF356 × 2
Baseband Frequency OPAMP : UA741 × 2
Negative Voltage Generator : ICL7660 × 1
RF Output Amp NPN Transistor : 2SC1815 × 2
Power Regulating NPN Transistor : 2SD880 × 1
