RLC-CDC hybrid circuit

Capacitive Discharge Circuit with a "modified" RLC controller for waveform and current control. It can be a way to generate AC energy from a DC source. - SPST switch triggers the ground failsafe. 🚧 - Capacitor (green trace) discharge pattern is main driver for AC output from DC source wave type patterns.....AC generation through DC collapse. Capacitor discharge spike peaks at around 100mA then holds stable at around 35mA. 🔋🔌 - PNP Transistor is a tunable threshold modifier after the capacitor for discharge wave pattern and assist in AC output behavior. - LED and lamp for visual feedback of current flow. ⚡ - 2 motors one (orange trace) for high speed use (cooling) the other (red trace) for low speed high torque utility uses. 💨🧰 Performance Metrics: 🧐 - Oscillation frequency ranges from 2.2 Hz to 9.52 Hz depending on load - RMS current observed between 9–31.9 mA - Voltage stability maintained near 6.99–7.01 V Link to original circuit build. https://everycircuit.com/circuit/6077461301428224 Comments always welcome. 👽

published 7 months ago