Joule thief 2

171

03:09:52

Joule thief

published 12 years ago

WarAxe

12 years ago

I don't get any errors. Eventually settles at a freq of 1.46hz.

Sgt_Shadow3600

12 years ago

When I inject noise it can't find a solution but it does eventually settle out

daringer

12 years ago

On noise inject no solution is found... Without noise it works...

Igor

12 years ago

I have reproduced the problem.

Igor

12 years ago

One way to kick-start oscillation is to select a resistor and to wiggle its value with the knob while simulation is running.

faceblast

12 years ago

put a switch in series with the battery to kick it. Your transformer inductance is to high; a ten Henry coil is going to be too big to carry around

Igor

12 years ago

Switch is even better (as suggested by faceblast) as this is what you would probably have in a real circuit.

WarAxe

12 years ago

Okay, note that i know to shake my phone i was able to reproduce the problem.

Tritonio

12 years ago

I reduced the inductance and placed a switch. Sure I can kick-start the oscillation by the switch but noise at ANY moment just crashes the simulation.

Igor

12 years ago

The crash is fixed.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.