full analog values divider 2

105

01:29:31

divides second value by first value. Second value can't be lower then first. At first setup voltages representing values. Here is 0.36 V as first value and 3.33 V as second value. Make sure that switch at top is open. Close all 4 switches at the buttom for a moment and open then. Close the switch at the top and wait for result on blue line.

published 7 years ago

Daro1985

7 years ago

need very slow simulation for best results

Daro1985

7 years ago

op-amps are set by default to max +-15V

hurz

7 years ago

Nice!

Daro1985

7 years ago

Yep. I don't know if I can madify circuit to work also when second value is lower then first... and this circuit plane is really so small sometimes... I just try to make it work in any combinations of a and b to make result c = b / a - all that just for my own ambition of learning when I have time for it... hurz can You advise me something ?. Just some hint ?

hurz

7 years ago

I like this idea. Here we go, I have simplified some switches and removed some opamps, cuz they are voltage controlled current sources, which are available within everycircuit. Driving them is another thing. However, I think its now a little better readable. Check this http://everycircuit.com/circuit/5133421679738880

hurz

7 years ago

@Daro1985, you asked for a "hint" I have modified your circuit 5 days ago, what do you think about? Any feedback is welcome!

hurz

7 years ago

One month later ...

Daro1985

7 years ago

thanks for a hint

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.