Password Code Hacker
Two stages...
Hacks codes up to 8 digits.
In this example I used just lucky number 7 🌞✨💫
What it does...
In the right low down corner is a dark box protected by a 7 digit passcode. WE WILL BREAK IT NOW!
The 555 gives impulse rate that is lowered here for showcase purposes. Under real conditions you have to adjust the 100nF and the resistors above for much more combination checks per second. The higher the rate the faster the code breaker will finish its job.
The binary code is injected into the passcode protected Lock. See the connection between the counter IC and the 7-segment decoder.
As the code lock buttons are either Hi or Low they can be easily compared. As soon as they match the lock opens and the Code breaker stops.
You see 96...cause 1001 equals 9 and 011_ equals 6.
The 8 LEDs show the sequence found by the two counters.
From red to green shows the first binary code starting with red and the second starting with light blue to purple. Read left to right. Remember we got only a 7 digit code...
You can set one of or two the counter on down or up for faster results but then you get a different result cause the binary code would be logically spelled backwards....
So the code >1001011< has been broken.
Feel like the boy in Terminator...
FIELD BANDWITH SELECTION HAS BEEN ADDED.
Enjoy 💫✌👽👍✨🌟💢☀️
