EveryCircuit
Contact
Reviews
Home
LeButch
modified 8 years ago

Phototransistor

1
68
287
03:02:41
This works like a phototransistor. Why should you buy this expensive part, if you just need to build a green LED the wrong way wich then changes its resistance depending on the light falling on it...?
published 8 years ago
hurz
8 years ago
Check this if you realy want to know how it works with LEDs http://everycircuit.com/circuit/5402506435231744
LeButch
8 years ago
I know, it works, cause i built it. I don't need an AC source aswell to operate it!
hurz
8 years ago
This circuit you put here is bullshit. And build it exactly like this is nonsense. And tell us its working is ...... im not saying may demonstrated way is the only one, but yours here is definately not whats working
LeButch
8 years ago
Here is the Video i made about this circuit you god of electronics who doesnt eaven know what the photoeffect is. In the Video I added a not gate behind it and tested it: https://youtu.be/nFPgXY7muEo
LeButch
8 years ago
So stop being a dick and inform yourself about things before criticising it!
Robert_Kidd
8 years ago
:-)
rich11292000
8 years ago
Contradiction
hurz
8 years ago
But the circuit you put here on everycircuit, and only the circuit, is bullshit. And I said there are more ways todo then I demostrated, but this one here demostrates nothing you presented! Is this so difficult to understand? And you havn't even checked and understand what my circuit is doing, you talking about an AC source. Its an Anduino and the way how the ports as input and output are used is described in SW and text. Read first then ask. @robert_kidd you seems to understand nothing, as always, and your comments are just useless as always. Ach und dann noch, Lieber Käsekasten, wo ist denn jetzt die Schaltung zu diesem Video link. Diese Schaltung hier kann es nicht sein, (scheisse nochmal)! Und bitte etwas Sachlicher in Ihrer Sprachwahl wenn es möglich ist.
Robert_Kidd
8 years ago
I was amused. I'm allowed to show I'm amused. If you don't like it you know what you can do.
hurz
8 years ago
Amused
LeButch
8 years ago
Bei der Schaltung auf YouTube habe ich eine zweite Diode und ein Not-Gate verwendet. Es ist aber das gleiche.
hurz
8 years ago
Es ist NICHT das Gleiche und schon garnicht das Selbe. Schon die Anzahl der Komponenten ist höchst unterschiedlich. Also bleibt es bei meiner Behauptung, diese Schaltung HIER hat keinerlei sinnvolle Funktion die jeder mit interesse an Elektronik nachbauen kann, um Spass an Elektronik zu bekommen. Diese Schaltung ist für jeden Anfänger eine totale Katastrophe. Basta.
LeButch
8 years ago
Hast du eigentlich nichts zu tun? Ich habe dir gerade mit einem Video bewiesen dass die Schaltung funktioniert und du behauptest es hätte keinen Nutzen. Hat ein Phototransistor einen Nutzen? Also!
hurz
8 years ago
Was genau verstehst Du an meinen ersten zwei Kommentaren nicht? Lese nochmal ganz langsam
LeButch
8 years ago
Du behauptest mein Schaltkreis würde nicht funktionieren. Danach behauptest du, er würde nutzlos sein. Irgendwie ein Wiederspruch...
hurz
8 years ago
Wenn er nicht funktioniert, dann hat er auch keinen Nutzen, richtig?
LeButch
8 years ago
ES FUNKTIONIERT EINWANDFREI!!!
LeButch
8 years ago
Ich werde jetzt nicht mehr auf deine Kommentare eingehen. Ich hab andere Gründe mich aufzuregen als so ein Heuchler wie du!
hurz
8 years ago
Bist Du taub? Das Drecksding da oben im Simulator ist Müll. Es ist nicht das was Du auf dem Board im Video zeigst. Was soll das also hier wenn Du keine Schaltung dazu öffentlich machen willst. Es ist zum piepen mit Dir. Und zügle bitte Deine Wortwahl an meine Person gerichtet.
LeButch
8 years ago
Genau den Schaltkreis hab ich im Video verwendet: http://everycircuit.com/circuit/6062561604927488
LeButch
8 years ago
Basiert auf dem Selben Prinzip.
hurz
8 years ago
HURRA endlich
hurz
8 years ago
Und warum war das jetzt so schwer? Ist das deine art Droidenwissen sammel zu wollen, oder du glaubst Albert Einstein zu sein und hast den Photoeffekt entdeckt? Also warum erst nach über 20 Kommemtaren diese halbe Offenlegung?
LeButch
8 years ago
Sag mal bist du dumm oder so?
hurz
8 years ago
Wo ist die Schaltung jetzt wieder hin? Bist du dumm, oder dümmer als dumm?
hurz
8 years ago
http://everycircuit.com/circuit/6062561604927488
LeButch
8 years ago
Als ob ich die scheiß Schaltungen die ich für dich mache weil du zu dumm bist simuliere über ein halbes Jahr lang meine Bibliothek verschmutzen lasse. Man hat mit dir wohl direkt nach der Geburt Fußball gespielt.
hurz
8 years ago
Willst du uns etwas mitteilen oder ist es einfach nur Scheisse die du hier zeigen willst?
hurz
8 years ago
Guck mal wie der Strom über den Kollektor des ersten Transistors abfließt. Das ist schon ziemlich grosse Kacke.
LeButch
8 years ago
Hättest du mir ein Wenig gute nicht Beleidigende Kritik gegeben währe mir der Fehler den ich gerade behoben habe viel früher aufgefallen.
LeButch
8 years ago
So wie sie jetzt ist habe ich die Schaltung gebaut und sie funktioniert. Dagegen kannst du nichts sagen.
hurz
8 years ago
I can repeat my second comment I gave you on this circuit, after your ignorant first answer.
LeButch
8 years ago
Then I can tell you that this circuit works. I built it and it worked. This is a fact. You can not say a fact is wrong.
hurz
8 years ago
I can see this circuit is wrong. There is not even a output. Put a voltage on the scope. Open your eyes or do we start all over again?
LeButch
8 years ago
The output is the second transistor. I think you don't know what a phototransistor is.
hurz
8 years ago
And I think you dont know what a output is. Please demostrate any voltage changing point in this circuit you have used as output!
LeButch
8 years ago
This thing is a resistor. Show me an output on a resistor.
hurz
8 years ago
Yes, very very funny, still no output signal. Were is the output you have used?
LeButch
8 years ago
Do you even know what a phototransistor is?!
hurz
8 years ago
This circuit is not working as sensor, as long there is no output signal you have used in your video. Thats the same stupid result we had already in the first "discussion round". Finaly you put the full circuit on the table, which is by magic gone again, cause you think you discovered the photoeffect? You think you are more then Einstein. You are such a dick, irritating users with your stubborn behaviour. Were is the output signal, arrogant dick?
LeButch
8 years ago
WHERE IS THE OUTPUT SIGNAL ON A PHOTORESISTOR?! THERE ARE TWO CONNECTIONS IS THIS SO HARD TO GET IN YOUR FUCKING RETARDED HEAD?! ARE YOU ILL, OR ARE YOU THAT DUMP ALL THE TIME?! MAN, I AM SO SICK OF EXPLAINING YOU EVERY OBVIOUS SHIT! YOU CAN FILL A BOOK WITH THE THINGS I HAD TO EXPLAIN YOU HERE!
hurz
8 years ago
Yes, you are just sick.
LeButch
8 years ago
Answer the question: where is the output of a phototransistor?
hurz
8 years ago
ECL incompatible with a TTL schmitt trigger?
LeButch
8 years ago
Answer the question then I do sp too.
hurz
8 years ago
I have already posted an example of how your circuit suppose to be, but who knows whats going on in your sick head. http://everycircuit.com/circuit/6570954045259776
LeButch
8 years ago
That was not the question. Answer the question.
hurz
8 years ago
I think thats what I have asked you first. I also know you like to do it on the wrong side. Anyway, it wouldnt be a big issue, but you should have at least one ouptut in your circuit, instead of sick screaming comments.
LeButch
8 years ago
Answer my Question
hurz
8 years ago
I translate, "I, LeButch, do not know how to demonstrate this circuit correct and please help me adding a proper output!" Is it this what you requesting.
LeButch
8 years ago
My question is, where is the output of a phototransistor.
hurz
8 years ago
Noob, a Phototransistor has two pins. Emitter and collector. A NPN one in common emitter topology with emitter connected to ground and collector connected to a pullup resistor to your power supply Vcc. The voltage at collector is the output you connect to to following processing modul e.g. microcontroller or analog filter. Hope this helps.
LeButch
8 years ago
It does. The output here is connected to ground and Vcc to 9V.
LeButch
8 years ago
10V, not 9V
hurz
8 years ago
And when you used exactly this circuit in your video, the next stage driver and LED is always connected to 10V or was it constant 9V? Wow cool.
LeButch
8 years ago
Srly, you make yourself dumper than you are. Everyone exept you got it.
hurz
8 years ago
And you think you are Einstein and you have invented the photoeffect but do not want to open your circuits to see how it works. You try to keep your little IP and try to make it hard for beginners to follow your "invention" just to look clever, what you definitive are not. You do not even understand what you publish. Actually I hate people who do information hiding like you do. You should know how bad this is as yourself are being a beginner.
LeButch
8 years ago
Ooooh, I am soooo sorry that this phototransistor was a part of a bigger circuit. Worse than Hitler confirmed
hurz
8 years ago
You present just bullshit circuits, one invisible (link gone) this one here not finished and how both should be interconneted is open as well. All in all a bullshit documentation of a project. Congratulations. And if we tell you whats missing you get rude. Again, congratulations.
LeButch
8 years ago
Then dont watch those projects.
hurz
8 years ago
Then don't publish circuits you do not understand!
LeButch
8 years ago
I understood how a phototransistor works. This circuits works exactly the same. Is this so hard to understand?
hurz
8 years ago
Maybe or maybe not. Nobody knows from the information you publish and hide. To unknown user it must look like bullshit, but, thats your problem if you think you can do better then why not do so? If you dont care, then why you are here and present something to public. Nobody will really care your bullshit. You can see that in your rating already. Even I push your bookmarks, they are extremly low. Without my attention to your thread you wont have even two boormarks in total.
LeButch
8 years ago
I dont care about bookmarks. Not everyone is a tryharder like you.
hurz
8 years ago
Wer will immer alles gwonnen haben wie ein Kleinkind? Hust prust ROFL
hurz
8 years ago
Was willst du eigentlich erreichen? Uns ist langweilig. Aber merkst Du nicht das du ständig alles für beendet erklärst und dann doch nicht aufhören kannst. Was willst du von mir? Ich will von dir schon lange nichts mehr. Nur will ich deine Dummheiten nicht verbreitet wissen will, wenn es z.B. um unbekannte physikalische Effekte geht die Du entdeckt haben willst. Wenn ich dich darauf hinweise dass das bullshit ist, dann nur das andere nicht auf den Mist herein fallen. Du bist immun gegen logische Argumente wie eine sich selbst zerstörende LED weil ihr Widerstand sich durch ihr eigenes Licht immer weiter verringert bis zur Explosion. Logik zieht bei dir nicht. Das weiss ich und die meisten anderen auch schon. Nur wer neu dazu kommt soll von mir gleich wissen mit welch unglaubwürdigen Quellen er es mit dir zu tun hat. Aber du bist mir als Person, die etwas lernen könnte, vollkommen egal. Das kannst du dir von robbi oder lenny oder geowichs besorgen. Lass einfach gut sein.
LeButch
8 years ago
Ich werde es nicht gut sein lassen. Viel zu lange bist du mit deinen Beleidigungen, falschen Tatsachen, Rufschlechtmachungen, etc. davon gekommen. Nicht mit mir. Wenn du mich zum Schweigen bringen willst musst du mit Argumenten gegen mich gewinnen.
hurz
8 years ago
Du bist ein Kleinkind.
LeButch
8 years ago
http://www.kbv.de/tools/ebm/html/4.3.5_162395004446927562274884.html

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.

Copyright © 2026 by MuseMaze, Inc.     Terms of use     Privacy policy