[WARNING HIGH VOLTAGE PROJECT]
Build your own air ionizer.
It's so simple !!
Let us blast the chemstrails!!!!
You will need :
10nF/400-600V capacitors x 30
1n4007 diodes x 30
1M and 3M3 resistors
CAUTION: EACH AND EVERY POINT OF THE CIRCUIT PRESENTED HERE IS AT AC MAINS POTENTIAL, THEREFORE EXTEMELY DANGEROUS TO TOUCH IN SWITCHED ON POSITION. UTMOST CARE AND CAUTION IS ADVISED, USE OF A WOODEN PLANCK UNDER YOUR FEET IS RECOMMENDED. NEWBIES PLEASE KEEP AWAY.
Only PPC or box type capacitors rated at 400 to 630 volts will work, other smaller types will not work.
This circuit is too sensitive, even a slightest mistake will hamper it's operations, check each and every points carefully once again for possible faults, and be extremely careful while checking as the circuit may carry lethal mains voltage.
Then connect to wall outlet and voillaa!!!
you save the world!!!
