Over Current Protection 1.15kW Max
Short Circuit Protection (Auto Cut-off Output)
Output Delay Protection (5s) to protect the load from unstable electricity (New)
Under Voltage Protection <12V (Doesn't supply output) (New)
1-Can handle loads of 1.15kW
2-Push button on the center left to reset
3-Push button on the bottom right to simulate short circuit
4.1-Red LED indicates fault
4.2-Yellow LED indicates Timer/Under Voltage (New)
4.3-Green LED indicates working (New)
5-12V input 11.8V output
6-Adjust the bulb power to 1.16kW to simulate Overload (Over Current)
7-Reset button only powers the sensors not the load itself (much safer/button will not be hot when using high loads compared to the previous one which powers including the load)
8-Adjust Power Source's Voltage to 11.9VDC to simulate Under Voltage (Yellow LED will turn on until the Input Voltage is 12V) (New)
Very stable and more efficient than the previous one (http://everycircuit.com/circuit/5518859665145856)
