Automatic bike stand circuit

366

03:54:02

Helo everyone I am Mohammed Gufran Ansari student of EC B.Tech. Here we made automatic side stand for bikes, we used manul switches and relays. Process is very simple when ignition switch is turn on then stand will be up and comes on its up poaition qhen it ia touch to 1 manually switch and turn off the motor and when ignition switch will be off then stand will be go down and touch to the second manually switch and stop the motor qhen that is comes on doqn position
  
Spare... We used 5v 4 relays, 2 two way switchs, ignition switch, 12v 5A battery, 7805 voltage regulator and gear motor. 

Connections... Connect ignition switch one terminal with battery 12v positive and second terminal connect with any coil terminal of relay.
Connect all relay parallel of each other and join one coil terminal with ignition switch and join second coil terminal with battery ground. 
Connect 7805 with battery (here 5v voltage source is 7805 voltage regulator).
Connect output of 7805 with relay

To be continue.... 

published 4 years ago

mlira

4 years ago

If you want it so the stand raises when the ignition is on and lowers when the ignition is off have a look at https://everycircuit.com/circuit/6220992860651520

THEASEER

4 years ago

Thanks @mlira ,Thats what I made, here we are operating it without any programming or without any module.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.