Switch circuit. Please help...

101

02:16:24

I wanted to make a relay switch by using an capacitor. To limit the loading time I added an 100Ohm Resistor. But nothing happens. When I drop the resistor it works but switches to fast when loading. Thanks for help.

published 10 years ago

dylanmissuwe

10 years ago

I don't really know what you mean but did you try to change the voltage source to 10V?

billoute720

10 years ago

Or decrease the voltage parameter of the relay to 8 V ?

sandeep1994

10 years ago

Try increasing the voltage by 10v to activate the relay as the nominal operative voltage is 9 v else decrease it.

sandeep1994

10 years ago

And for the switching frequency u can add an inductor in series with capacitor or capacitor parallel to capacitor or decrease the value of ur existing capacitor. But mf and f value is not economical so...try inductor and capacitor in series and parallel respectively with ur existing capacitor

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.