!
Experimental Caution ! Dangerous the left hand side off 500 ohm resisistor is @ 200 volts so wattage would be based on this ( I*I )*R where i = 30mA r = 500 ohm zener diode wattage is 10*0.06 not tested works in simulation select diode with higer rating
The. 2.2uF is type X high voltage Capacitor
Takes about 5 or 10 sec to reach max brightness
Only room to wire in 12 change the 3300 resisitor using 100 - ( 2 * number off leds) <Max 48>/0.02
