directdrivewm

8 switches plus a water level switch and lid switch. Switches open and close based upon timer and water level. From left to right switch 1= on off 2= drive motor switch 3= agitate solenoid switches 4 and 5 bypasses water level switch. Water level switch (bottom most switch when in landscape position, starts out connected to line near switch 5 when tub is full, then connects to line near switch 4 when full thereby disengaging the three left most lights representing Hot water valve, cold water valve and spin solenoid. Basically when user selects wash cycle with warm water and turns on timer, switches 1,2,3,6and7 close.. Then when tub fills, water level switch moves routing power away from water valves and routes to timer, motor and agitator.

correction.. on off switch is left and bottom most switch. Water valve is bottom center most switch