This is a circuit that makes up the 555 timer IC, unfortunately the SR latch does not have a reset but i put the transistor there anyway to represent that it was meant to serve as a reset option.
Op amps that make up voltage comparators are just set to 1V/V as they are just meant to serve as HIGH and LOW logic.
TOP FOUR GROUND PINS
from left to right:
-Vcc
-Control Voltage
-Reset
-Discharge
LEFT SIDE
from top down:
-Threshold
-Trigger
BOTTOM
-GND
RIGHT SIDE
-OUT
WHEN QNOT is 0 output is 1 (should be)
