CE Amplifier

123

01:54:48

Common Emitter Amplifier

published 11 years ago

thebugger

11 years ago

I recommend introducing a negative feedback of some sort. The gain is too high therefore the distortion is too high. Just add a 10-50ohm resistor in series with the emitter capacitor to increase the negative feedback a notch and everything should get in order. Ah yes doing so will somewhat decrease the gain so if you need precisely this output voltage then a few other readjustments might be needed. Nevertheless splendid keep it up ^^

olex

11 years ago

Voltase AC and DC don't be mix.. danger..

jose1979

11 years ago

To succeed you must remove the resistor 47 which is in series with the capacitor and put forward not behind a 10k resistor

jose1979

11 years ago

Sorry the resistor 27 and put forward not behind a 10k resistor

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.