modified 8 years ago

LED

01:45:43

NOTHING

published 8 years ago

SidShakal

8 years ago

Not sure why, but the ground needs to be connected to the circuit in order for it to run. Also, you might want to reverse the polarity of either the voltage source or the diode.

amirmohamedhh

8 years ago

ايه دى

justinmh

8 years ago

Also also put a 150 ohm resistor in series with the led so it only allows the rated 20 milliamps through.

makemoney

8 years ago

put 150ohm resistor before the led.....and connect the ground after the led

justinmh

8 years ago

Echo...

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.