|
Rev 3.7 The circuit has been updated, I have removed the two selectors switches from the bottom that set the gear limit. Replaced them with two logic source switches. E.g. (jumpers or solder shorting on the board.) Both source switches off is 5th gear, top one on is 6th gear and both on is 7th gear.
You can still choose from a 5, 6 or 7 speed gear box . NOTE: no checking done for when in hi gear and you switch back to a low gear setting. Eg 7 speed switch back a 5 speed. This is a gear paddle shifter display, The green dot on the 7 segment display lights up each time a up or down paddle is pressed starting at n for nuteral, down for r for reverse, or up for gears 1 to (5, 6 or 7) on the display. The power is always on and the lightblue led turns on when you reach 6th gear or reverse to show there are no more gears to shift. The Red led show that you are in reverse and thr orange is for nuteral.
|
