Using only XOR, XNOR, and NOT, try to make a 2-input OR, NOR, AND, or NAND gate.
The only other allowed components for function are 5V DC sources and ground. No diodes, resistors, other (AND, OR, NAND, NOR) logic gates, relays, etc
Output must be stable; should maintain function no matter in what order the inputs are toggled (so no flip-flops, even internal)
At no point should an output be sinking current. Basically, no tying outputs together. This would short circuit the logic chips.
Maximum logic source count is 2. These will be the inputs
Good luck 👍🏻
