Vacuum Sputtering idea - copy

143

01:08:29

Revised


Not positive. Not negative. Not sure. Not done.
Right most switch is the assumed resistance before ionization in the vacuum, and after.  Center switch for the doubler for convenience.  Middle left is the DPDT relay to the mot transformer(s). Left most switch is the main power with indicator light/ emergency stop twist reset, as I plan on building this into a box with guages showing E/I/W on both sides of the transformer. The "DPDT" relay will actually be a allen-bradley contactor with overload from 5-32I. There will also be an auto transformer from mains to "box"        comments welcome.

published 7 years ago

LeButch

7 years ago

As far as I know, you cant ionize a vacuum. But I guess I understood you wrong.

BillyT

7 years ago

I wonder how vacumm tubes work then? ....

LeButch

7 years ago

There is nothing ionized in vacuum tubes. You can only ionize atoms and there are no atoms in vacuum.

Addramyrz

7 years ago

There also isnt a complete vacuum in vacuum tubes, or florescent lights.

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.