Ref.: YouTube:
Building a Clean Boost Guitar Pedal
https://www.youtube.com/watch?v=3Ioqe8T_NMo&t=1613s
The youTube Video shows a buffer opamp in non-inverting mode used to amplify an audio signal by a gain of 10 dB (i.e. factor 3.2). I built up teh circuit on a breadboard and the circuit behaves correctly as explained.
Now I wanted to simulate the circuit with EveryCircuit, but...:
This circuit modeled with EveryCircuit seems not to simulate the behavior of the output correctly: On the output of the opamp the signal has a DC offset of 4.5 V (this is correct), but the signal should have a DC offset of zero V after the 10uF decoupling capacitor. but htis is not the case.
Does someone knows the answer for this? Greetings Richard
