Not working....

195

04:37:48

Why isnt this working

published 10 years ago

Gluisf

10 years ago

insert ground on the input

weezerr2183

10 years ago

Ground the pwr source up you freq to 50kHz and the windings on the Xformer primary=1 secondary = 10

solowerr

10 years ago

Поставь перемычку снизу трансформатора

MaxMinecraft107e

10 years ago

the ground needs to be connectes to the freq generator

x35m95

10 years ago

Ground the frequency source and increase it to at least 70hz

x35m95

10 years ago

*1khz

x35m95

10 years ago

At least 1 khz

tiggerroo

10 years ago

Put ground on bottom port of the inpput

VinylRecords

10 years ago

Connect ground to both ground transformer sides

kolman2012

10 years ago

Remove the transformer and connect the volt source to the lamp then it must work...

gsai

10 years ago

ALSO connect ground to AC source and change freq to 1khz you will get o/p

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.