12V Push Button Circuit Breaker v4

Working Voltage Range -> 12 to 12.3 VDC (Green Light Turns On) (New) Over Current Protection 1.1kW (Red Light Turns On) (New) Short Circuit Protection (Auto Cut-off Output, Red Light Turns On) Output Delay Protection (5s) to protect the load from unstable electricity (No Output, Yellow Light Turns On) (New) Under Voltage Protection <12V (Doesn't supply output, Yellow Light Turns On) (New) Over Voltage Protection >12.3V (Doesn't supply output, Yellow Light Turns On) (New) 1-Can handle loads of 1kW 2-Push button on the center left to reset 3-Push button on the bottom right to simulate short circuit 4.1-Red LED indicates Fault 4.2-Yellow LED indicates Not Ready (New) 4.3-Green LED indicates Working (New) 5-12V input 12V output (New) 6-Adjust the bulb power to 1.1kW to simulate Overload (Over Current) 7-Reset button only powers the sensors not the load itself (much safer/button will not be hot when using high loads compared to the previous one which powers including the load) 8-Adjust Power Source's Voltage to 11.9VDC to simulate Under Voltage (Yellow LED will turn on until the Input Voltage is 12V) (New) 9-Adjust Power Source's Voltage to 12.4VDC to simulate Over Voltage (Yellow LED will turn on until the Input Voltage is 12.3V) (New) Very stable and more efficient than the previous one (http://everycircuit.com/circuit/5596656286826496)

published 9 years ago