Basic LED

120

03:40:48

Just to know about basic LED circuit

published 9 years ago

2ctiby

9 years ago

That's a good start. These LED lights need about 2v and a current of about 20mA. They will blow if you put too much current (amps) through them. Put a 1kΩ resistor in series with the LED and play at turning the battery volts up to see what happens. Look at the volts and amps reading shown there next to the LED as you do that....Always use a resistor with an LED, you will soon know what size resistor to use in any circuit when you have played with this. V=IR is good to play with at the same time if you want to check the maths as you do that.

vamsikittu18

9 years ago

Thanks

add comment in editor

EveryCircuit is an easy to use, highly interactive circuit simulator and schematic capture tool. Real-time circuit simulation, interactivity, and dynamic visualization make it a must have application for professionals and academia. EveryCircuit user community has collaboratively created the largest searchable library of circuit designs. EveryCircuit app runs online in popular browsers and on mobile phones and tablets, enabling you to capture design ideas and learn electronics on the go.